Designed to win, the new KEO BLADE CARBON CERAMIC enhances the experience of using blade technology on an automatic pedal. This new version is the result of the experience acquired during years of technical development at our factory and of continuous improvement in daily contact with the greatest champions.
Light, aerodynamic, powerful, the new KEO BLADE CARBON CERAMIC has all the advantages that allow you to improve and optimize performance up to victory. It is for this reason that KEO BLADE CARBON CERAMIC is the unanimous choice of many champions, who have made it a weapon in the conquest of their greatest successes.
KEO BLADE CARBON CERAMIC thus benefits from the best weight / power ratio in its category.
Its new design completely integrates the blade to achieve unparalleled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in the CR version (Chromoly + axle) for a weight of 110 g per pedal. It is available in 3 release voltage levels: 12, 16 and 20.
CERAMIC BEARING
Every component, every single sphere is carefully chosen to guarantee high quality and performance. The spheres are precisely calibrated one by one using an instrument, the micrometer, to position them correctly, according to their dimensions, inside the rings on the perfectly adapted sides. Each bearing is also equipped with a truly unique construction.
Longevity is the main advantage of ceramic bearings. More round and harder, the balls are not altered by external forces or deposits, thus ensuring a constant and lasting performance level. Furthermore, the ceramic is not subject to the effects of corrosion. These physical characteristics guarantee a 4 to 6 times longer life compared to a normal steel bearing.
Friction reduction is the most well-known and emblematic advantage of ceramic faucets. The perfectly circular shape of the spheres, their duration, together with the optimization of the grease used with these materials allows a reduction of 18% of the friction forces applied to the bearing.
OPTIMIZED AXIS LINE: GREATER TRANSFER OF POWER AND RELIABILITY
The axis of the new BLADE CARBON CERAMIC is entirely redesigned. It is built around an oversized axis and a passing axis line composed of a ceramic bearing in an internal position and a needle bushing centered below the supporting surface. This new construction allows you to earn about 2 watts at 100 rpm.
The distance between the ball bearing and the needle bushing has been increased by 25%. This provides greater rigidity to the entire line of the axis and, consequently, allows to improve the transmission of power.
The estate was also the object of particular attention. This has been improved by 120% for increased reliability and longevity. For this reason, the new axis line receives a new plug with an o-ring seal at its outer end. In the internal position it is provided with a double lip seal.
LOOK axes are approved only after a rotation test of 2 million cycles at 100 rpm. with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates an impact at every turn). This is equivalent to an André GREIPEL sprint of 1700 watts at 100 rpm. for 333 hours! The test is far superior to the standard in force, ISO 4210.
VERY POWERFUL SUPPORT SURFACE
To respond to the wishes of the most demanding cyclists, in particular those who compete, the pedal-cleat system must allow an effective power transfer thanks to a large and rigid contact surface.
The support surface of BLADE CARBON CERAMIC is equipped with a 67 mm wide stainless steel overmolded plate. This optimizes the cleat-pedal contact zones, regardless of the pedaling angle.
With 700 mm2 of supporting surface, BLADE CARBON CERAMIC offers a contact surface optimized for unparalleled efficiency and power transfer on the market.
USE
Segment Race
BODY
Carbon
AXIS
Chromoly + steel
THREAD
9/16 X 20 mm
BEARING
Ceramic
AXIS / SOLE HEIGHT
14.8 mm
AXLE DISTANCE OF THE PEDAL / CRANKCASE
53 mm
SUPPORT WIDTH
67 mm
SUPPORTING AREA
700 mm²
VOLTAGE
Pedals supplied with carbon 12 blades mounted + additional 16 carbon blades
(Carbon 20 blades available separately)
CLEAT
Gray Cleat Kéo Cleats
ANGULAR FREEDOM
0 °, 4.5 ° or 9 ° depending on the type of cleat (Black, Gray, Red)
PEDAL WEIGHT
110 g (290g pair with cleats and screws)
COLORS
Black
ACCESSORIES
2 pairs of blades + 1 pair of gray Keo Cleat + screws
WARRANTY
2 years
For the procedure of withdrawal please
visit this page.
From the order elapses on average 48 hours which must be added the
shipping time ranging from 24-48 hours express delivery for Europe to 2-3 working days for the
rest of the world.
These timings may change if the order containes items not immediately available.
For more information, please consult our FAQ page.
Send an email to info@ciclimattio.com specifying your phone number or email, you will be contacted soon.
List € 159.99
Cicli Mattio € 124.56
List € 169.00
Cicli Mattio € 138.50
List € 49.99
Cicli Mattio € 39.33
List € 89.99
Cicli Mattio € 73.75
List € 18.99
Cicli Mattio € 14.74
List € 169.90
Cicli Mattio € 125.38
List € 64.90
Cicli Mattio € 53.19
List € 99.90
Cicli Mattio € 81.87
List € 13.99
Cicli Mattio € 10.65
List € 22.99
Cicli Mattio € 17.20
List € 159.00
Cicli Mattio € 117.18
List € 17.10
Cicli Mattio € 12.28
List € 49.99
Cicli Mattio € 36.87
List € 39.00
Cicli Mattio € 31.96
List € 167.00
Cicli Mattio € 130.29
List € 145.00
Cicli Mattio € 113.08
List € 167.00
Cicli Mattio € 130.29
Cicli Mattio € 127.83
List € 185.00
Cicli Mattio € 151.61
List € 169.00
Cicli Mattio € 131.93
List € 1,099.00
Cicli Mattio € 900.63
List € 469.90
Cicli Mattio € 385.08
List € 14.95
Cicli Mattio € 12.25
€ 7,999.00 € 5,899.66
List € 69.90
Cicli Mattio € 57.28
List € 2,299.00
Cicli Mattio € 1,884.03
€ 7,299.00 € 5,383.38
List € 5,049.00
Cicli Mattio € 4,137.66
List € 1,599.00
Cicli Mattio € 1,310.38
List € 175.00
Cicli Mattio € 129.47
List € 139.00
Cicli Mattio € 113.91
List € 19.90
Cicli Mattio € 16.31
List € 3,299.00
Cicli Mattio € 2,703.53
List € 99.90
Cicli Mattio € 81.87
List € 14.95
Cicli Mattio € 12.25
List € 4,499.00
Cicli Mattio € 3,686.93